⚡ Proving Grounds v1.0 - Live

The
Gauntlet.

3 Boats·3 Levels·9 Thrones

👑 Record Unchallenged For

-- DAYS -- HRS -- MIN -- SEC

Official Specifications

Race Conditions.

Every entry must meet these specs. No exceptions. Deviations earn an "Unofficial" tag.

Layer Height

0.20 mm

Infill Pattern

Gyroid / Grid

Infill Density

10%

Wall Perimeters

Min. 2

Model Version

Mini Only

Structural Integrity

Must Pass

⚠️ Any deviation from these specifications results in an "Unofficial" ranking. No exceptions. A faster time printed off-spec does not beat a slower time printed on-spec.

🌡️

Volumetric Flow Limit Warning - High speed demands high melt-rates. If your hotend can't keep up with your feed rate, your walls will delaminate. Speed means nothing without structural integrity. A fast print that fails the squeeze test is a DNF.

Entry Protocol

How to Claim Your Rank.

Three steps. No sign-ups. No forms. It all happens on Cults3D.

01 ⏱️

Step 01

Record

Keep your stopwatch running or record a continuous timelapse from start to finish. Visual proof is non-negotiable. No recording = no rank.

02 📸

Step 02

Capture

Take a high-res photo of the finished print on the bed with the "Print Finished" screen visible. Both the print and the screen must be in the same frame.

03 🏁

Step 03

Submit

Post a "Make" on the Cults3D model page. Include your Time, Machine, and Material in the description. You're on the board.